Few-mode vertical-cavity surface-emitting laser: Optional emission of transverse modes with different polarizations

Few-mode vertical-cavity surface-emitting lasers that can be controlled to emit certain modes and polarization states simply by changing the biased contacts are proposed and fabricated. By directly etching trenches in the p-doped distributed Bragg reflector, the upper mesa is separated into several submesas above the oxide layer. Individual contacts are then deposited. Each contact is used to control certain transverse modes with different polarization directions emitted from the corresponding submesa. These new devices can be seen as a prototype of compact laser sources in mode division multiplexing communications systems

Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks

Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits

strong synergistic effect of the (110) and (100) facets of the SrTiO3 perovskite micro/nanocrystal: decreasing the binding energy of exciton and superb photooxidation capability for Co2+

Crystal facet regulation is an effective method for preparing SrTiO3 or other perovskite semiconductor materials with high photochemical catalysis performance. In general, the edge-truncated cube of SrTiO3 micro-nano particles has been widely reported because of the multiple crystal facets exposed at the same time. However, the effect of the (110) facet and the interaction between the (100) and (110) facets on the properties of photo-induced carriers is still not very clear. In this article, we have designed and prepared two edge-truncated cube SrTiO3-a small and large area proportion of the (110) facet, respectively. In addition to the morphological and structural characterization, high-resolution XPS and femtosecond multiphoton transient absorption (fs-TA) spectroscopy were used to detect the atomic vacancy and were applied to confirm the state of carrier transition. The results showed that the larger (110) facet led to two influences-more Sr vacancies and more self-trapping excitons (STEs) with an ultra-low binding energy (E-b = 2.13 meV), about 1.17 meV lower than that of the sample with the smaller (110) facet. In particular, the larger (110) facet also caused a much higher photooxidation performance for Co2+ to Co3+. This study not only enriches the arsenal of SrTiO3 materials but also sheds new insights into the understanding of the synergistic effect essence of the (100) and (110) facets, which could promote the development of new perovskite photocatalytic materials, particularly in the recovery of heavy metals

strong synergistic effect of the (110) and (100) facets of the SrTiO3 perovskite micro/nanocrystal: decreasing the binding energy of exciton and superb photooxidation capability for Co2+

Crystal facet regulation is an effective method for preparing SrTiO3 or other perovskite semiconductor materials with high photochemical catalysis performance. In general, the edge-truncated cube of SrTiO3 micro-nano particles has been widely reported because of the multiple crystal facets exposed at the same time. However, the effect of the (110) facet and the interaction between the (100) and (110) facets on the properties of photo-induced carriers is still not very clear. In this article, we have designed and prepared two edge-truncated cube SrTiO3-a small and large area proportion of the (110) facet, respectively. In addition to the morphological and structural characterization, high-resolution XPS and femtosecond multiphoton transient absorption (fs-TA) spectroscopy were used to detect the atomic vacancy and were applied to confirm the state of carrier transition. The results showed that the larger (110) facet led to two influences-more Sr vacancies and more self-trapping excitons (STEs) with an ultra-low binding energy (E-b = 2.13 meV), about 1.17 meV lower than that of the sample with the smaller (110) facet. In particular, the larger (110) facet also caused a much higher photooxidation performance for Co2+ to Co3+. This study not only enriches the arsenal of SrTiO3 materials but also sheds new insights into the understanding of the synergistic effect essence of the (100) and (110) facets, which could promote the development of new perovskite photocatalytic materials, particularly in the recovery of heavy metals

A Novel Long Noncoding RNA, Lnc-OAD, Is Required for Bone Morphogenetic Protein 2- (BMP-2-) Induced Osteoblast Differentiation

Long noncoding RNAs (lncRNAs) play very important roles in cell differentiation. Our recent study has demonstrated that a novel lncRNA named lnc-OAD modulated 3T3-L1 adipocyte differentiation. In the present study, we examined the roles of lnc-OAD in bone morphogenetic protein 2- (BMP-2-) induced osteoblast differentiation. Lnc-OAD expression was increased during BMP-2-induced osteoblast differentiation in C3H10T1/2 mesenchymal stem cells and MC3T3-E1 preosteoblast cells. Knockdown of lnc-OAD expression by specific siRNA remarkably decreased early osteoblast differentiation. In addition, stable knockdown of lnc-OAD by lentivirus vector also significantly inhibited late osteoblast differentiation and matrix mineralization in vitro. Conversely, stably overexpressed lnc-OAD with lentiviral vector accelerated osteoblast differentiation. Mechanistically, knockdown of lnc-OAD reduced significantly the phosphorylation of AKT and the expression of Osterix induced by BMP-2, while overexpression of lnc-OAD enhanced the phosphorylation of AKT and the expression of Osterix. Taken together, our study suggests that lnc-OAD plays an important role in modulating BMP-2-induced osteoblast differentiation via, at least in part, regulating the AKT-Osterix signaling axis

Efficient and compact sol-gel TiO₂ thermo-optic microring resonator modulator

Thermo-optic (TO) modulators play an increasingly important role in wavelength routers, lidar, optical computing, and other reconfigurable photonic systems. Highly efficient TO tunable microring resonators (MRRs) were first demonstrated based on a sol-gel TiO₂ platform in the 1310-nm waveband owing to the synergistic effect between the TiO₂ core and SU-8 cladding with both the negative thermo-optical coefficients. The MRR modulator with SU-8 polymer as the top cladding layer exhibits a thermal tuning efficiency of 33.0 pm/mW, which is more than 14 times higher than that with silica top cladding. Its rise/fall times of 9.4 us/24 us and a Pπ power of 7.22 mW were achieved, indicating a relatively high TO modulator figure of merit among noncrystalline material platforms allowing monolithic integration on different substrates. These results yield a strong promise for applying the sol-gel TiO₂ platform in photonic integrated circuits and suggest a new angle of view to design compact and efficient TO modulators in wearable devices, visible/infrared communication, and biophotonic applications

Efficient and compact sol-gel TiO₂ thermo-optic microring resonator modulator

Thermo-optic (TO) modulators play an increasingly important role in wavelength routers, lidar, optical computing, and other reconfigurable photonic systems. Highly efficient TO tunable microring resonators (MRRs) were first demonstrated based on a sol-gel TiO₂ platform in the 1310-nm waveband owing to the synergistic effect between the TiO₂ core and SU-8 cladding with both the negative thermo-optical coefficients. The MRR modulator with SU-8 polymer as the top cladding layer exhibits a thermal tuning efficiency of 33.0 pm/mW, which is more than 14 times higher than that with silica top cladding. Its rise/fall times of 9.4 us/24 us and a Pπ power of 7.22 mW were achieved, indicating a relatively high TO modulator figure of merit among noncrystalline material platforms allowing monolithic integration on different substrates. These results yield a strong promise for applying the sol-gel TiO₂ platform in photonic integrated circuits and suggest a new angle of view to design compact and efficient TO modulators in wearable devices, visible/infrared communication, and biophotonic applications

Synergistic Effect of Sr-O Divacancy and Exposing Facets in SrTiO3 Micro/Nano Particle: Accelerating Exciton Formation and Splitting, Highly Efficient Co2+ Photooxidation

As a typical perovskite-type crystal, polyhedral strontium titanate (SrTiO3) has shown anisotropic charge transport behavior in recent studies, however, the carrier transportation and transition of which has not been explained very clearly. This work present the existence of Sr and O divacancies in the novel rhombicuboctahedron SrTiO3 micro/nano particles (Sr1-xTiO3-x/TiO2-x) with exposing (100), (110) and (111) facets and the diameter of 300-700 nm synthesized via hydrothermal synthesis, and also summarizes the dissociation mechanism of self-trapped excitons (STEs) caused by the divacancy and facet effect. In addition, most importantly, the metastable STEs with ultra-low binding energy (E-b < 3 meV) under illumination are discovered. Combining the model of S-scheme heterojunction, a conversion mechanism of photoinduced carriers is proposed. The photocatalytic reaction of Co2+ is used as the probe reaction, and the unique Sr1-xTiO3-x/TiO2-x possesses a high photooxidation efficiency of Co2+, by which 70.3% of Co2+ is oxidized to Co3+ (CoOOH) in 5 min. This finding may provide a guideline for an optimal design of the photocatalytic materials for the recovery and extraction of metal ions based on SrTiO3

Efficient and compact sol-gel TiO₂ thermo-optic microring resonator modulator

Thermo-optic (TO) modulators play an increasingly important role in wavelength routers, lidar, optical computing, and other reconfigurable photonic systems. Highly efficient TO tunable microring resonators (MRRs) were first demonstrated based on a sol-gel TiO₂ platform in the 1310-nm waveband owing to the synergistic effect between the TiO₂ core and SU-8 cladding with both the negative thermo-optical coefficients. The MRR modulator with SU-8 polymer as the top cladding layer exhibits a thermal tuning efficiency of 33.0 pm/mW, which is more than 14 times higher than that with silica top cladding. Its rise/fall times of 9.4 us/24 us and a Pπ power of 7.22 mW were achieved, indicating a relatively high TO modulator figure of merit among noncrystalline material platforms allowing monolithic integration on different substrates. These results yield a strong promise for applying the sol-gel TiO₂ platform in photonic integrated circuits and suggest a new angle of view to design compact and efficient TO modulators in wearable devices, visible/infrared communication, and biophotonic applications

Synergistic Effect of Sr-O Divacancy and Exposing Facets in SrTiO3 Micro/Nano Particle: Accelerating Exciton Formation and Splitting, Highly Efficient Co2+ Photooxidation

As a typical perovskite-type crystal, polyhedral strontium titanate (SrTiO3) has shown anisotropic charge transport behavior in recent studies, however, the carrier transportation and transition of which has not been explained very clearly. This work present the existence of Sr and O divacancies in the novel rhombicuboctahedron SrTiO3 micro/nano particles (Sr1-xTiO3-x/TiO2-x) with exposing (100), (110) and (111) facets and the diameter of 300-700 nm synthesized via hydrothermal synthesis, and also summarizes the dissociation mechanism of self-trapped excitons (STEs) caused by the divacancy and facet effect. In addition, most importantly, the metastable STEs with ultra-low binding energy (E-b < 3 meV) under illumination are discovered. Combining the model of S-scheme heterojunction, a conversion mechanism of photoinduced carriers is proposed. The photocatalytic reaction of Co2+ is used as the probe reaction, and the unique Sr1-xTiO3-x/TiO2-x possesses a high photooxidation efficiency of Co2+, by which 70.3% of Co2+ is oxidized to Co3+ (CoOOH) in 5 min. This finding may provide a guideline for an optimal design of the photocatalytic materials for the recovery and extraction of metal ions based on SrTiO3